MAX Disconnect Causes

Code

Disconnect Code Description

Code

Progress Code Description

1

10

PR_CALL_UP

2

30

PR_MODEM_UP

10

Modem never detected DCD

31

PR_MODEM_AWAITING_DCD

11

DCD Detected but went inactive

32

PR_MODEM_AWAITING_CODES

12

Couldn’t parse result codes

40

Terminal server session started (needn’t be logged in yet)

20

User Quit

41

Started raw TCP

21

Timeout waiting for input

42

Started immediate telnet

22

Exiting telnet foreces disconnect

43

Raw connected to host

23

No IP addr for switching to a framed protocol
(e.g. SLIP,PPP)

44

Telnet connected to host

24

Exiting raw TCP forces disconnect

45

Rlogin started

25

Exceeded login attempts

46

Rlogin connect

26

Attempted to raw TCP when its disabled

50

Call is active on modem outdial session

27

Saw <ctrl-C> during logins

60

Outing/bridging session up

29

User closed virtual connection

61

PR_OPENING_LCP

30

Active call for a modem outdial session closed. Originating end terminated (i.e. controlling terminal server session went down).

62

PR_OPENING_CCP

31

Rlogin exiting

63

PR_OPENING_IPNCP

32

Bad rlogin command line option specified

64

PR_OPENING_BNCP

40

LCP timed out waiting for rsp

65

LCP in Open State

41

Fail to converge on LCP negotiations

66

CCP in Open State

42

PAP authentication failed

67

IP NCP in Open State

43

CHAP authentication failed

68

Bridging NCP in Open State (progress of LCP negotiations see RFC1331 state transition table)

44

Authentication failed from remote server

69

LCP in Initial state

45

LCP got terminate request from far-end while LCP was in Open state

70

LCP in Starting state

46

LCP got terminate request from upper-layer while LCP was in Open state. (i.e. normal/graceful LCP closure)

71

LCP in Closed state

47

Closing LCP because no NCPs were open

72

LCP in Stopped state

48

For MP sessions, closing LCP because can’t determine which MP bundle to add user to.

73

LCP in Closing state

49

For MP sessions, closing LCP because can’t add more channels

74

LCP in Stopping state

50

Session table full

75

LCP in Rquest-Sent state

51

No more resources

76

LCP in ACK-Received state

52

IP address is invalid

77

LCP in ACK-Send state

53

Cannot resolve hostname

80

IPX NCP in Open state

54

Bad or missing port number

90

V110 is connected

60

Host Reset

91

V110 in V110_STATE_OPENED state

61

Connection was refused

92

V110 in V110_STATE_CARRIER state

62

Connection timed out

93

V110 in V110_STATE_RESET state

63

Connection was closed by foreign host out

94

V110 in V110_STATE_CLOSED state

64

Network unreachable

65

Host unreachable

66

Network admin unreachable

67

Host admin unreachable

68

Port unreachable

100

Session timeout

101

Invalid incoming user

102

Disconnect due to callback enable

120

Protocol disabled/unsupported

150

Disconnect requested by RADIUS

160

Timeout, resync exceed MAX_V100_RETRIES

170

Timeout waiting trying to authenticate